Replacing the old module. No need to remove the door card - It's easy!




Possible problems

Other than mechanical faults, 95% of the time, replacing the module with a mini-cube or with a refurbished original module, will fix any faulty Renault window.
For those remaining 5% of cases, here are some tips to get your window working.

If you have no motor action, or can hear no motor noises, check your fuse (dashboard upper left).
If blown, only replace with the correct value fuse.

Ensure the small connectors in the module loom plug are in good condition.
If in any doubt, clean and/or use a narrow tool to squash the contacts closer together.

Sometimes, there may be corrosion of the contacts inside the loom module plug, or the main door connector.

The motor itself rarely fails, but you can check if it is OK by carefully probing 12v directly to the motor where the module plugs into it.

If you hear motor action, but the window does not move - the fault is now mechanical - probably a snapped cable or damaged clip, and you will need to remove the whole door card - see the video below.

If you have fitted a QER refurbished original module, and the window will only work in little steps, you need to initialise it by holding the "up" switch for 10 seconds whilst the window is at the top.
sometimes it takes more than one attempt.
Poor battery condition can prevent initialisation, so make sure it is well charged.

Mechanical problem? How to remove the door card to investigate further..
 


Our happy customers


"Thanks worked a treat....";
(eBay ID j*******at)

"Well done guys! Received the item in under 24hrs, Part fitted and everything 100%."
(eBay ID b******11)

"Thanks item works perfectly as described."
(eBay ID m******12)

"Very good many thanks."
(eBay ID i********38)

Read more customer comments



 

Why choose the mini cube™?

The Mini-cube™ is the simple,
inexpensive and easy-to-install solution for Renault Megane 2, Renault Scenic 2 and Renault Clio 3 built between 2002-2009

 

Customer satisfaction guarantee

Customer Satisfaction
Guarantee to our customers

The QDI Mini-Cube™ is manufactured in-house by our experienced technicians.
We use only top quality components, and we encapsulate the whole assembly in fire-resistant, moisture-proof, epoxy resin.

All products are thoroughly tested before despatch and carry a full 12 month guarantee.

If, for any reason, you are unhappy with your purchase, simply return for a full refund within 30 days.