Replacing the old module on the similar Renault Megane window - It's easy!
Very many Renault owners have experienced a problem with one or more of their car's electric windows.
The same problem is found in some versions of the Peugeot 206/207/307/308, which have a very similar window control module fitted.
Often after a period of erratic or intermittent action, the window simply stops working, quite often in the open position.
Problems may be experienced on any, or all, of the nearside or offside, front or rear door electric windows.
The cause can be either a mechanical or electrical fault.
If, when pressing the up/down window switch, the motor can be heard to be
running, or attempting to turn, the fault is almost certainly mechanical.
Otherwise, no sound from the motor, or just a click from a relay, indicates an electrical fault, which mainly affects some versions of the Peugeot 206/207/307/308 built between 2003 and 2012.
Mechanical failure can often be rectified by replacing a snapped steel cable,
or plastic clip, or else the complete regulator assembly.
There are numerous after market suppliers able to supply these at reasonable cost.
Electrical failure is often caused by damage to the electronics,
as a result of moisture entering the Temic control module fitted to the
lift motor on some vehicles.
Or if the window operates of its own accord, this also indicates an electrical problem.
The original 6-pin Temic module is not available separately new, or even with the motor, but only as part of the complete original Citroen window regulator, including the motor, at a cost of several hundred pounds.
Simple and inexpensive
A simple and inexpensive cure, if the cause is electrical, and a
grey ended 6 pin Temic module is fitted, is the "mini-cube"™ module from QDI Ltd, which is a simple plug-in replacement for the original module.
If you want to retain all the original features like one-touch, we also offer the original Temic module.
A little more expensive, but that's your choice to make.
Not all versions of the Peugeot 206/207/307/308 are fitted with it, so you
should inspect your lift motor before ordering.
They are easily affected by any rainwater or condensation that can find its way inside.
This is what it looks like:
The QDI "mini-cube"™ module does away with the troublesome electronics of the original, but still retains full control of the window from the door
The small downside is that there is no "one-touch" operation.
The mini-cube is fully encapsulated, so it cannot be affected by moisture like the original.
It will successfully replace the grey capped 6-pin Temic module fitted to the front or rear, nearside or offside, window regulator motor of the Peugeot 206/207/307/308 built up between 2003 and 2012.
Our happy customers
"Thanks worked a treat....";
(eBay ID j*******at)
"Well done guys! Received the item in under 24hrs, Part fitted and everything 100%."
(eBay ID b******11)
"Thanks item works perfectly as described."
(eBay ID m******12)
"Very good many thanks."
(eBay ID i********38)
Read more customer comments
Why choose the mini cube™?
The Mini-cube™ is the simple,
inexpensive and easy-to-install solution for Peugeot
- Save £100's
- Plug in simplicity
- Easily installed in minutes
- Instructions included
- PayPal buyer protection
- Guaranteed quality
- Satisfaction Guaranteed
- 12 month Guarantee
- 1st Class Post delivery
- Fully encapsulated
- Moisture proof
- 10% Discount for 10+
- 1 cubic inch size
Guarantee to our customers
The QDI Mini-Cube™ is manufactured in-house by our experienced
We use only top quality components, and we encapsulate the whole assembly in fire-resistant, moisture-proof, epoxy resin.
All products are thoroughly tested before despatch and carry a full 12 month guarantee.
If, for any reason, you are unhappy with your purchase, simply return for a full refund within 30 days.